[ILLUSION] Koikatu! - Questions & General Discussion Thread

[tnk.vera]

In studio go to Anim > Joint Adjustment , it's the right hand so uncheck right arm or right forearm group. Maybe this will help to resolve the problem. Someone gave an other tip in KKPE (advanced mode) for this there's very long time but i don't remember.

Was it the one where you can fix the twist by adjusting the Y position (about 0.005) of the wrist bones (cf_j_hand_L, cf_j_hand_R) in KKPE?

 

[Katolix]

Do you also happen to know why after changing female character the BonesConstraint for the penis (dan_entry & dan_end) are completely gone and ruined the penetration? I'm running into this issue with most of his scenes nowadays, except for the newer ones, it's just frustrating.

Unfortunately I have the same problem and i need to revert it to NC. It doesn't do it in every scene but even so, I have no clue where it's coming from.

Was it the one where you can fix the twist by adjusting the Y position (about 0.005) of the wrist bones (cf_j_hand_L, cf_j_hand_R) in KKPE?

I don't know, I haven't used this method yet but I think it must be something like this. If one day I have this problem I will come back to your post to test if it works.

 

[PixelzzHunter]

Unfortunately I have the same problem and i need to revert it to NC. It doesn't do it in every scene but even so, I have no clue where it's coming from.

I don't know, I haven't used this method yet but I think it must be something like this. If one day I have this problem I will come back to your post to test if it works.

How do you re-link the nodes and make it work after changing characters in his scenes? I tried to swap character's type to BP and redo the nodes in NC but they're still not aligned afterwards. It's just frustrating to make edits with his scenes now.

 

[Katolix]

I use BP too.I delete cf_j_vagina_root->k_f_dan_entry and cf_j_waist01 -> k_f_dan_end
Sometime i have 2x cf_j_waist01 -> k_f_dan_end in NC. I don't know why...
After the delete, I re-link and try different BP and change a little bit the valor of axis Y.

 

[PixelzzHunter]

I use BP too.I delete cf_j_vagina_root->k_f_dan_entry and cf_j_waist01 -> k_f_dan_end
Sometime i have 2x cf_j_waist01 -> k_f_dan_end in NC. I don't know why...
After the delete, I re-link and try different BP and change a little bit the valor of axis Y.

I figured it out, not sure why the older version of betterpenetration (4.5.5.1 KK/KKS) wasn't working for my studio, I upped to version 4.5.5.2 and it's compatible now. https://github.com/illusionmods/betterpenetration/releases
Anyway, thanks for the guide!

 

[Cetol]

I am trying to edit deliriumbears uzaki beach scene, I have managed to reduce the boob size but now the hands of the male character don't interact properly. It is still spaced out to the original size and the boobs react before the hands actually touch, anyone know how to reduce the distance between hand and boob? Every time I try to change the hand position, the boobs move with it prematurely.

 

[Katolix]

I am trying to edit deliriumbears uzaki beach scene, I have managed to reduce the boob size but now the hands of the male character don't interact properly. It is still spaced out to the original size and the boobs react before the hands actually touch, anyone know how to reduce the distance between hand and boob? Every time I try to change the hand position, the boobs move with it prematurely.

in your picture, i see you found the NC Left hand.You have "link position" checked and "rotation link" checked too. Now for reduce the distance try to change the valor in "Link position".Exemple: you can try +100 or -100 on X and click on "Update selected" and see where the hand move. if the hand move in the wrong sens reset the valor manualy. (remember which valor was before changing) try with Z or Y until you have the good distance.

 

[NeoNeg]

Hi, how can I hide the eyes on male characters? I’ve always had that question, but I never found any guide on how to do it. Could someone explain, please?

 

[tnk.vera]

Hi, how can I hide the eyes on male characters? I’ve always had that question, but I never found any guide on how to do it. Could someone explain, please?

So you take an especially sharp knife a- I mean...

Two routes to do this, one is more simple but potentially temporary if you update your material editor.
Route 1: Turn the eyes off
Open Material Editor -> Put hitomi,eye in the search box -> Toggle everything off

Route 2: Replace all the eye textures with nothing
Open Material Editor -> Put hitomi,eye in the search box -> scroll down and replace all the MainTex with this image of literally nothing.

 

[Eixa]

Does anyone know who made these https://gofile.io/d/yvED9o

 

[NeoNeg]

So you take an especially sharp knife a- I mean...

Two routes to do this, one is more simple but potentially temporary if you update your material editor.
Route 1: Turn the eyes off
Open Material Editor -> Put hitomi,eye in the search box -> Toggle everything off

Route 2: Replace all the eye textures with nothing
Open Material Editor -> Put hitomi,eye in the search box -> scroll down and replace all the MainTex with this image of literally nothing.

It was actually simpler than I thought Thanks a lot for the answer and the help

 

[Katolix]

Does anyone know who made these https://gofile.io/d/yvED9o

I tried but unfortunately i don't find them.
but if this can help, here the clues.

Spoiler: Clues

Card 1: author history and name of the character in korean.

Card 2: author history not similar and the name too.

And the character could be Yamashiro from azur Lane but not sure.

I also checked on pixiv but had no luck..

 

[T3los]

question , im thinking of doing a clean koi install in another drive , im downloadind rx22 , would it ok with just that and copy my mods or should i apply the HF patch too , been a long time since i installed clean XD

 

[Eixa]

I tried but unfortunately i don't find them.
but if this can help, here the clues.

Spoiler: Clues

Card 1: author history and name of the character in korean.

Card 2: author history not similar and the name too.

And the character could be Yamashiro from azur Lane but not sure.

I also checked on pixiv but had no luck..

Yea I looked everywhere ,but nothing turned up. I either wanted to see if anyone here knew, as a last hope oh well it is what it is I guess thanks

 

[Eixa]

question , im thinking of doing a clean koi install in another drive , im downloadind rx22 , would it ok with just that and copy my mods or should i apply the HF patch too , been a long time since i installed clean XD

Back up all mods first in your my mods folder cuz HF patch will delete them then run the patch after its done put back all your mods back

 

[N1OFP]

This is kind of silly, but does anyone know how to scale/resize the Advanced KKPE windows? I'm trying to mess with colliders but I literally cannot see multiple bones because the bone scroll window is so tiny. I tried scaling one thing, but that just messed up the regular studio UI, not this one.

Edit not even 10 seconds after posting: I'm fucking stupid. I found the tiny options tab in the main KKPE window, that's what adjusts height and width. Hahahahahaha

 

[MorumoMerry]

When I select CloseTop in Accessories, most of them extend down to the character's feet.
Do you know what is causing this?

 

[Eixa]

When I select CloseTop in Accessories, most of them extend down to the character's feet.
Do you know what is causing this?

https://gofile.io/d/cWgHkn Use this to see if it works

 

[gustavo40]

Does anyone know who made these https://gofile.io/d/yvED9o

SSSaa (おやつ)

Kemono

kemono.cr

Kemono

kemono.cr

おやつ

pixiv

www.pixiv.net

 

[MorumoMerry]

https://gofile.io/d/cWgHknこれを使って動作するか確認してみましょう

ありがとうございます。その2つはすでに含まれています。
うーん、何が問題なんだろう？
今のところ髪の毛が床に落ちることはありませんが、アクセサリーの上部はこのようになっています。衣装メニューから選択すると、正常に表示されます。

 

[Eixa]

ありがとうございます。その2つはすでに含まれています。
うーん、何が問題なんだろう？
今のところ髪の毛が床に落ちることはありませんが、アクセサリーの上部はこのようになっています。衣装メニューから選択すると、正常に表示されます。

なるほど、私もそう思っていましたが、最初はよく分かりませんでした。今後は、必要に応じて布用のアクセサリータブの使用を控えてください。

 

[Wiz1z]

Can someone help me with this? The hair of my Surtr is always on the ground. I tried to fix it by editing the position and downloading KK_CharacterAccessory as well as KK_JetPack but none of them works. I'm currently using HF Patch 3.34

Thanks.

 

[MorumoMerry]

My hair has never moved to my feet.

 

[yisanwu11]

My [Eijineer][KK] Blue Archive v1.63.zipmod doesn’t seem to be working. Could you please let me know what might be the issue?

 

[tnk.vera]

Can someone help me with this? The hair of my Surtr is always on the ground. I tried to fix it by editing the position and downloading KK_CharacterAccessory as well as KK_JetPack but none of them works. I'm currently using HF Patch 3.34

Thanks.

Try putting this in your KK\BepInEx\Plugins Folder:

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

 

[SaintSinner098]

hello, anyone have this specific Mod [光团子] : 中秋追月 ?

 

[tnk.vera]

hello, anyone have this specific Mod [光团子] : 中秋追月 ?

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

 

[pinakabakod]

anyone know who made the original scene?

[R-18]👠🔞

拎起来草🥵

www.pixiv.net

swear ive seen it shared before

 

[SaintSinner098]

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

thank you

 

[Wiz1z]

Try putting this in your KK\BepInEx\Plugins Folder:

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

Thank you. It finally works. I guess i installed the old version of the plugin so it's not compatible with the new version of HF

 

[xNoval]

Can someone help me with this? I use HC scene when i change the second female character of the scene the first one lost her teeth . I look at the character blendshape but cant find where it is . But if i only change the first female ch of the scene the teeth still normal

 

[humble begger]

are there anyways to properly load Koikatsu Sunshine scenes on the original koikatsu game without getting the "this scene is from a different game or it is corrupted message? kinda bummed that i cannot load some of these scenes

 

[Katolix]

are there anyways to properly load Koikatsu Sunshine scenes on the original koikatsu game without getting the "this scene is from a different game or it is corrupted message? kinda bummed that i cannot load some of these scenes

(Make sure to do a backup before if it doesn't work)
Put this in Koikatu\Koikatu_Data\Managed and Koikatu\CharaStudio_Data\Managed

Gofile - Cloud Storage Made Simple

Secure, fast and free cloud storage solution. Upload and share files instantly.

gofile.io

All credit to Anon11 from Koikatsu Discord.

 

[iloveMinavamp]

Some of my scene looks like this, anyone knows how to solve this?

 

[Katolix]

Some of my scene looks like this, anyone knows how to solve this?

I don't have this problem with my game. Try to update (NC) Node Constraits.

 

[Flemiran]

Anyone know a good shader combination for "see-through" overlay so the bra not disappear and/or protrude through the shirt?

 

[tnk.vera]

Anyone know a good shader combination for "see-through" overlay so the bra not disappear and/or protrude through the shirt?

Might have to play with KKUTS or MainClothesAlphaPlusTess and use displacement and/or tessellation to avoid the clipping issue.

 

[gustavo40]

Anyone know a good shader combination for "see-through" overlay so the bra not disappear and/or protrude through the shirt?

change the render queue

 

[aldiele]

[R-18]Elegg

还整了个心型洞这不就是给人❌的吗 角色卡可以从这位大佬https://www.pixiv.net/users/2170315配布获得clothing:https://mega.nz/file/l7oBHbzI#NYvZeB0Xohmu96htlNVhjpVKnB07YiLDUu

www.pixiv.net

Whenever I load this costume it doesn't load well, for example part of the shoes are missing and the black mesh around the breasts is missing aswell. It gives me no errors when I load except something about whateverthefuckholder

 

[Flemiran]

Might have to play with KKUTS or MainClothesAlphaPlusTess and use displacement and/or tessellation to avoid the clipping issue.

I tried with all alpha shader and it doesn't showed up